--------------------------------------------------------------------------
			 SOFT-ICE MINI-HOWTO

			   Brian Reifsnyder
			     Jan 23 2000
--------------------------------------------------------------------------

As requested, here are instructions on installing Soft ICE (v 2.8) on
FreeDOS:

(This is how I did it, anyway.)

1.  Setup a PC running FreeDOS.

2.  Make a C:\SI subdirectory

3.  Boot the FreeDOS PC with an MS-DOS boot disk and copy the Soft ICE
  disk to C:\SI (I used an MS-DOS boot disk because FreeDOS's copy
  command doesn't work too well, yet.)

4.  Make a new CONFIG.SYS file on C:\ with only ONE LINE as follows:

    DEVICE=C:\SI\S-ICE.EXE

Note: I have seen some testing that indicates FreeDOS only loads the
  first device driver correctly.

5.  Make sure that C:\SI is in the path statement in the
  C:\AUTOEXEC.BAT file.

6.  Remove any floppy disks and re-boot.

7.  To run a program under Soft ICE type:

    LDR program